On this page

monday.com button: update status on another board

A small wooden rhino presses a brass button on one small tile board; a golden thread runs to a second board where one tile glows from amber to green.

Yes, but through a workflow, not a classic recipe. monday.com’s AI Workflows article lists three blocks that fit together: the “When button clicked” trigger, the Find connected item action and the Change status action. Put them in one workflow and a button click on Board A can change a status on the linked item on Board B.

Three limits apply:

  • You need a Pro or Enterprise plan.
  • The two boards need a Connect Boards link, or a shared value for Find matching item.
  • The docs list the blocks. They do not give a full example of this recipe, so test it on a copy.

You need a button that updates a status column on a different board. Click “Mark Complete” on the Booking board, and the matching item on the Delivery board changes to “Ready to Ship”. No board-hopping and no copy-pasting item names.

Bottom line: if you are on Pro or Enterprise and a button must change the status of an item that already exists on another board, the workflow route (button, Find connected item, Change status) fits best on paper. If you are on Basic or Standard, or people only need to see the other board’s status, skip it. Use a Mirror column for viewing, or check an outside tool such as Make or Zapier (plan and cost not verified).

We have not tested this recipe in monday.com. Every level below comes from what monday.com’s own help articles list, as cited in Sources. We use levels, not a number out of 5, because the docs do not show this exact recipe and a score would claim more than we know.

Criterion Classic recipe (create or move item) Workflow: button + Find connected item + Change status Mirror column
Fit for updating a status on another board Low. The recipes create or move items. None updates the status of an item that already exists. High. The docs list the “When button clicked” trigger, Find connected item and Change status. Low. It is read-only, so it shows the status but cannot change it.
Plan needed Not verified. It uses monthly automation actions (250 a month on Standard). We did not check the plan for each recipe. Pro or Enterprise. The workflow builder is on Pro and Enterprise, and every run uses actions. Not verified. It needs no workflow, so it uses none of your actions. The Connect Boards limits depend on your plan.
Setup effort Not rated. It is ready-made, but it does not do this job. Medium. Link every existing item, add the button, then build three blocks. Builder access is released gradually. This is our reading of the steps, not a timed test. Low. You add a column and no workflow is needed.
Evidence in monday.com’s docs High for create or move, and none for this job. Medium. The blocks are listed, but there is no worked example of this recipe. Test it on a copy of your boards. High. The docs say it is read-only.

Who should not use each route

  • Classic recipe: anyone who needs to change a status on an item that already exists on the other board.
  • Workflow route: teams on Basic or Standard, teams with small monthly action allowances, and boards with no Connect Boards link and no shared value.
  • Mirror column: anyone who must change the status from this board.
  • Outside tool (not rated): teams whose plan already has the workflow builder, because the native route covers this. Plan and cost: not verified.

Not sure which route fits your boards? Book a free 30-minute consultation. No obligation.

monday.com’s automation recipes for cross-board work are built to create items or move items. Typical recipes read like this:

  • “When status changes, create an item in another board”
  • “When an item is created, move it to another board”

There is no ready-made recipe for “when a button is clicked on Board A, update the status of a linked item on Board B”. Mirror columns show another board’s values, but they are read-only, and most Mirror columns cannot be used as automation triggers.

Even item creation has limits. monday.com’s cross-board article says the “static” column types Dependency, Link to Item and Time Tracking are not supported in mapping. For more on what cross-board automations cannot do, see cross-board limitations.

Route The right call when Not the right call when
Classic recipe (create or move item) You need a new item on another board, or you are happy to move the whole item. You need to change a status on an item that already exists on the other board.
Workflow: button + Find connected item + Change status A person clicks a button and one linked item on another board must change status. You are on Pro or Enterprise. Your plan is Basic or Standard. Your boards have no link and no shared value.
Mirror column People only need to see the other board’s status. Anyone needs to change that status from this board. Mirror columns are read-only.
Third-party integration (Make, Zapier) A tool outside monday.com is involved, or your plan has no workflow builder. The native route already covers it. Plan and cost: not verified, so check the vendor’s page.

This answers the common search “walk me through setting up a cross-board automation to update status across monday.com boards”.

  1. Link the boards. Add a Connect Boards column on Board A that links each item to its item on Board B. See Connect Boards and Mirror columns. Find connected item can only follow links that exist, so add the link to every existing item first.
  2. Add a button column on Board A, named for the step (for example “Mark Won”).
  3. Open the workflow builder. Click AI Workflows in the left pane, then + Start from scratch to build block by block. monday.com says access from the left pane is being released gradually. Building with the plain-language prompt box uses AI credits.
  4. Choose the trigger “When button clicked”.
  5. Add Find connected item. Pick the Connect Boards column from step 1. This block finds the linked item on Board B.
  6. Add Change status (or the Update item block) and set the status you want, for example “In Queue”.
  7. Name the workflow, turn it on, and check usage. In the Autopilot hub, open the Usage tab to see how many actions it consumes.

No Connect Boards link? Use Find matching item instead. It finds an item on any board by a matching column value, such as a deal ID.

Because the docs do not show this exact recipe, run it on copies of both boards before you use it with a live team. Check the exact block names in your own account, since monday.com releases parts of the builder gradually.

If you would rather have it built for your boards, our monday.com customization work covers this. We are a certified monday.com partner.

Take a company with two boards: a CRM board for deals and a Delivery board for onboarding won deals.

  • A sales rep clicks “Mark Won” on the CRM board.
  • The workflow finds the connected Delivery item and sets its status to “In Queue”.
  • Later, the delivery manager clicks “Assign Specialist” on the Delivery board. A second workflow finds the connected CRM item and sets it to “Onboarding Assigned”.

Two directions means two workflows, one per direction, each with its own button trigger. Each workflow run uses actions from your monthly allowance.

If you want a status change on one board to start automations on a connected board instead of a button, see status-change cross-board triggers.

Need help with monday.com automations?

Book a free 30-minute consultation with a certified monday.com partner. No obligation.

Book a Free CallFree 30-minute call · No obligation

Workflows work at subitem level too. The docs list these:

  • the trigger “When subitem status changes”
  • the Update subitem block
  • changing a column value for a subitem
  • Find connected subitem and Find matching subitem blocks

To refer to a subitem, you use the Subitem ID instead of the Item ID. The cross-board article also says Mirror columns of subitems are supported as triggers. Classic “match” automations do not support subitems.

What Limit or rule Source
Workflow builder plans Pro and Enterprise AI Workflows article
Boards one board can connect to Basic 1, Standard 5, Pro 20, Enterprise 200 (up to 60 per column) Connect Boards linkage limits
Connected items per board 10,000 on Basic, Standard and Pro; 100,000 on Enterprise Connect Boards linkage limits
Connected items per cell 750 Connect Boards linkage limits
Automation actions on Standard 250 a month Actions and limits article
Condition steps in a workflow They also use your action quota Actions and limits article
Unsupported column types in cross-board mapping Dependency, Link to Item, Time Tracking Cross-board automations article
Match recipes They connect only the first matching item and support one condition at a time Cross-board automations article

The usage article says Enterprise customers can buy more actions. On other plans you only have the actions your plan includes.

Problem Likely cause What to do
Nothing changes on Board B The item has no Connect Boards link, so Find connected item has nothing to follow. Add the link, or use Find matching item with a shared value.
You cannot find the workflow builder Your plan is not Pro or Enterprise, or the left-pane access has not reached your account yet. Check your plan. monday.com says the access is released gradually.
Status will not change from the mirrored side Mirror columns are read-only. Change the status on the linked item through the workflow, not through the Mirror column.
A column does not copy across boards The column type (Dependency, Link to Item, Time Tracking) is not supported in mapping. Use a supported column, or rebuild the value in the workflow.
Automations stop running The monthly action quota is used up. monday.com describes a 72-hour grace period before runs pause. Open Autopilot hub > Usage, cut high-use automations, or upgrade.
A formula column is blank in a workflow Workflows cannot use formulas that rely on Mirror column values. Use a source column that is not a Mirror.
A classic automation does not start the next one monday.com’s docs do not say a change made by one automation always starts another. Test the chain, or put both steps in one workflow.
  • Teams on Basic or Standard plans. The workflow builder is Pro and Enterprise.
  • Teams with small monthly action allowances. Every run uses actions, and Standard has 250 a month.
  • People who only need to see another board’s status. A Mirror column is simpler and uses no workflow.
  • Boards with no link and no shared value. Without a Connect Boards link or a matching value, the workflow has nothing to find.
  • Teams who want a no-setup answer. If you cannot build or maintain a workflow, ask for help first.

Our view: for most teams on Pro, a button plus a workflow is the cleanest native route. Where a rival tool or an integration fits better, we say so.

  • Creating a board. The AI Workflows article lists Create board and Duplicate board blocks, so a workflow can create a board for you. For the manual steps, monday.com’s Create your first board help section is the place to start.
  • Board types and “monday task manager”. These do not fit this article. They are better as their own posts.

For other ways to connect your boards to outside tools, see our monday.com integrations service.

6 questions

Can a monday.com button update a status on another board?

Yes, through a workflow. The docs list the “When button clicked” trigger, the Find connected item block and the Change status action. There is no ready-made classic recipe for it. The docs do not show this exact recipe, so test it on a copy.

Do I need a Connect Boards column?

For Find connected item, yes: it follows a Connect Boards link. Without one, Find matching item can locate an item on another board by a matching column value.

Which plan do I need?

The AI Workflows article lists Pro and Enterprise. Check your own plan before you build.

Can I update subitem status from a button?

The docs list a subitem status trigger, the Update subitem block, Find connected subitem and Find matching subitem. They do not show a button-to-subitem example. Test it on a copy.

Can it work in both directions?

Yes, with one workflow per direction. Each has its own button trigger and uses Find connected item to reach the other board.

Does it use my automation actions?

Yes. Standard accounts get 250 actions a month, and workflow condition steps also count. Check the Usage tab in the Autopilot hub.

Want this built and checked for your boards? Book a free 30-minute consultation with a certified monday.com partner. We have worked with 110+ clients. No obligation, and we reply within 2 business days.

Book a free consultation

Free 30-minute call. No obligation.

Book a Free ConsultationFree 30-minute call · No obligation

All checked on Wed 11 Nov 2026.

View all in monday.com Automations All posts

Before you go

Wait!

Do you know we offer FREE 30-min consultation?

If you have a project in mind, let’s talk.
We are here in Canada. If required, we can meet in person.

Book a free consultation

Free 30-minute call

Automation not doing what you need? Get a free consultation.

with Rakesh PatelFounder and CEO of TaskRhino

Pick a timeSend a message instead

Opens Calendly in a new tab

Certified monday.com PartnerReply within 2 business days110+ clients served